Performance improvement

Performance improvement

Displaying 1 to 5 (of 5 products)
  • APEXI Air Power Intake Kit Neck:76mm

    APEXI Air Power Intake Kit Neck:76mm

    Item name:APEXi Power Intake - Universal Filter OD- 160mm, ID- 76mm (500-A022)Brand:APEXiProduct Type:Intake SystemsCondition:Brand NewDimension:Outer Diameter (filter)= 160mm (6.30 in)Inner Diameter (filter base opening)= 76mm (3 in)Length (filter)= 120mm (4.72 in)BHP Gain:14bhpCompatible Models:Universal Fit For All Models Of CarsDescriptions:The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spots within the cleaner.The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is trouble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost.

  • D1 SPEC Racing Oil Catch Tank

    D1 SPEC Racing Oil Catch Tank

    D1 Spec oil catchInlet \ Outlets: 11mmDesigned to filter crankcase. Oil separator prevents penetration into the intake tract of oil vapors

  • K&N Cone Air Filter / 3'' inlet

    K&N Cone Air Filter / 3'' inlet

    Part RU-3580 Product Specifications Product Style: Round Tapered Universal Air FilterBase Outside Diameter: 6 in (152 mm)Top Outside Diameter: 4 in (102 mm)Flanges: 1Flange Inside Diameter: 3 in (76 mm)Flange Length: 1.75 in (44 mm)Flange Type: CenteredHeight: 5 in (127 mm)Filter Material: Cotton GauzeTop Style: RubberTop Material/Finish: NoneFilter Re-Oiling Amount: 0.88 oz (26 ml)Inner Wire: NoWeight: 1.4 lb (0.6 kg)Product Box Length: 7.13 in (181 mm)Product Box Width: 7.13 in (181 mm)Product Box Height: 7.25 in (184 mm)



    The HP-1010 protects your motor from harmful contaminants and debris while allowing for high-flow rates. It is built to satisfy the needs of owners who require the best oil filter available. All K&N oil filters are made to meet stringent engineering standards. Thick wall construction, high flow rates & outstanding oil filtration all provide the highest quality available in a performance oil filter for the Honda Civic. K&N's Performance Gold® Oil Filters are covered by a limited warranty to be free of defects in material and workmanship when installed and replaced using the engine and equipment manufacturer's recommended service interval.The 2000 Honda Civic 1.6L engine, 2001 Honda Civic 1.7L engine, 2001 Honda Civic Si 2.0L engine, 2002 Honda Civic 1.7L engine, 2003 Honda Civic 1.3L engine, 2003 Honda Civic 1.7L engine, 2004 Honda Civic 1.3L engine, 2004 Honda Civic 1.7L engine, 2005 Honda Civic 1.3L engine, 2005 Honda Civic 1.7L engine, 2006 Honda Civic 1.3L engine, 2006 Honda Civic 1.8L engine, 2007 Honda Civic 1.3L engine, 2007 Honda Civic 1.7L engine, 2008 and 2009 Honda Civic 1.7L, 2010 and 2011 Honda Civic 1.3 & 1.8L and Honda Civic Si models with 2.0L engines get excellent engine protection from the HP-1010 Performance Gold® Oil Filter.

Displaying 1 to 5 (of 5 products)